{
  "generated": "2026-09-29T21:14:37.410Z",
  "updated": "2026-09-29",
  "source": "https://edgetech.eu/standards.md",
  "statusMeaning": {
    "shipped": "in products customers buy today",
    "on-order": "a working implementation, finished into a product when a customer orders it",
    "tested": "working in lab or pilot, not yet in a product",
    "planned": "on the roadmap, no code yet",
    "not-implemented": "not supported and not planned"
  },
  "standards": [
    {
      "standard": "IEC 61851-1 (Mode 3 AC charging)",
      "revision": "2017",
      "status": "shipped",
      "statusLabel": "Shipped",
      "where": "EVSE-C-3x32A, all chargers"
    },
    {
      "standard": "IEC 61851-23 Ed. 2 (EV wake-up by CP disconnect)",
      "revision": "2023",
      "status": "shipped",
      "statusLabel": "Shipped",
      "where": "EVSE-C-3x32A firmware 2.10.17, April 2025"
    },
    {
      "standard": "IEC 62752 (residual DC detection, 6 mA)",
      "revision": "2016 + A1",
      "status": "shipped",
      "statusLabel": "Shipped",
      "where": "DC-leakage sensor in every charger"
    },
    {
      "standard": "Modbus RTU over RS485, open and documented",
      "revision": null,
      "status": "shipped",
      "statusLabel": "Shipped",
      "where": "Charge controller (slave); site controllers and GridShield receiver (master)"
    },
    {
      "standard": "DSMR 5 / ESMR 5 P1",
      "revision": "5.0.2",
      "status": "shipped",
      "statusLabel": "Shipped",
      "where": "EVSE-SC-02; only DSMR 5 meters work with load balancing"
    },
    {
      "standard": "MQTT over TLS (device to platform)",
      "revision": null,
      "status": "shipped",
      "statusLabel": "Shipped",
      "where": "Site controllers, EdgeTech platform"
    },
    {
      "standard": "SG-Ready (heat pump 2-contact interface)",
      "revision": "BWP 2013",
      "status": "shipped",
      "statusLabel": "Shipped",
      "where": "GridShield receiver relays; Matter SG-Ready module"
    },
    {
      "standard": "GridShield (ElaadNL), LoRa point-to-point",
      "revision": null,
      "status": "shipped",
      "statusLabel": "Shipped",
      "where": "Controller and receiver, tested against ElaadNL both ways"
    },
    {
      "standard": "evcc device template",
      "revision": "smartevse",
      "status": "shipped",
      "statusLabel": "Shipped",
      "where": "Official template, EdgeTech-maintained"
    },
    {
      "standard": "LoRa 868 MHz (EN 300 220)",
      "revision": null,
      "status": "shipped",
      "statusLabel": "Shipped",
      "where": "GridShield"
    },
    {
      "standard": "Matter 1.4 Energy EVSE device type (0x050C) over Thread",
      "revision": "1.4",
      "status": "on-order",
      "statusLabel": "Implemented, on order",
      "where": "Matter over Thread set; not CSA-certified, certification on request"
    },
    {
      "standard": "Matter Electrical Power Measurement (0x0090)",
      "revision": "1.4",
      "status": "on-order",
      "statusLabel": "Implemented, on order",
      "where": "Charger module and P1 meter reader"
    },
    {
      "standard": "OCPP 1.6J",
      "revision": "1.6",
      "status": "on-order",
      "statusLabel": "Implemented, on order",
      "where": "Working implementation, not yet deployed"
    },
    {
      "standard": "ISO 15118-2 / -20 (digital communication, SoC on AC, vehicle ID)",
      "revision": "-2:2014, -20",
      "status": "on-order",
      "statusLabel": "Implemented, on order",
      "where": "ISO 15118 module, add-on, expensive"
    },
    {
      "standard": "S2 (EN 50491-12-2)",
      "revision": "2024",
      "status": "planned",
      "statusLabel": "Planned",
      "where": "Site controller and GridShield as S2 resource managers"
    },
    {
      "standard": "EEBus SPINE/SHIP (heat-pump use cases)",
      "revision": null,
      "status": "planned",
      "statusLabel": "Planned",
      "where": "Supported interface for heat pumps, on order"
    },
    {
      "standard": "NTA 8043 / NCS 8043:2026 (NL smart charging, self-declaration)",
      "revision": "2026",
      "status": "planned",
      "statusLabel": "Planned",
      "where": "Self-declaration package on request; not filed yet"
    },
    {
      "standard": "MID (legal metering)",
      "revision": null,
      "status": "on-order",
      "statusLabel": "Implemented, on order",
      "where": "MID certification of the on-board measurement as a paid option; no external meter, only a display"
    },
    {
      "standard": "V2G / bidirectional",
      "revision": null,
      "status": "not-implemented",
      "statusLabel": "Not",
      "where": "Under investigation; nothing claimed"
    },
    {
      "standard": "OCPP 2.0.1 / 2.1",
      "revision": null,
      "status": "not-implemented",
      "statusLabel": "Not",
      "where": "Not until 1.6J is in production"
    }
  ]
}