Skip to content

Standards

Protocol inventory

Every EV-charging and energy protocol, with one of three answers each: implemented, can implement, or not and why. The research to complete this table is scheduled; the list below is the starting point.

Decision pending  Whether "Protocol inventory" stays as described is not yet decided. It is on the site so the team can see it in place.

View as MarkdownUpdated 2026-09-29

Research to do. The final table will state, per protocol: implemented / can implement (on order) / not, and why not or why not relevant.

Protocol or standard Area Preliminary answer
IEC 61851-1, -21-2, -23 AC charging, EMC, wake-up Implemented
IEC 62752 DC leakage detection Implemented, in every charger
IEC 62196 Connectors Type 2 socket and cable; by component
ISO 15118-2 / -3 / -20, DIN 70121 Vehicle digital communication, Plug & Charge, SoC, V2G Module on order; V2G under investigation
OCPP 1.6J Charger to back-office Working implementation, not yet deployed
OCPP 2.0.1 / 2.1 Charger to back-office Not, until 1.6J is in production
OCPI, OICP, OCHP Roaming between operators Not: back-office side, not the charger
OSCP Capacity between DSO and CPO To be assessed
OpenADR 2.0b / 3.0 Demand response To be assessed
IEEE 2030.5 Smart energy profile Not relevant in NL/BE today
EEBus SPINE / SHIP Heat pumps, EVSE use cases Supported interface on order
S2 (EN 50491-12-2) Dutch HEMS On order
NTA 8043 / NCS 8043 NL smart charging self-declaration Package on request
Matter 1.4 Energy EVSE, DEM, EPM Home ecosystems Implemented, uncertified
SG-Ready Heat pumps Implemented
GridShield (ElaadNL) Congestion signal Implemented, tested both ways
Modbus RTU / TCP, SunSpec Field bus, inverters RTU implemented and open; TCP/SunSpec on the integration side
MQTT Device to platform Implemented
DSMR 5 P1 Smart meter Implemented
MID Metering On request
Eichrecht German calibration law To be assessed with the MID option
EN 50549 Grid connection of generators Only relevant for V2G
CHAdeMO, CCS, NACS DC charging Not: AC chargers only
EN 17186 Charging point identification Labels by product
NEN 1010 / IEC 60364-7-722 Installation Installation manuals follow it
RED, EN 300 328, EN 300 220 Radio Covered per product
Thread, CSA Matter certification Radio and certification Thread implemented; certification on request